Explore Emerson
Locale Modal toggle, current value:
RIDGID logo
Toggle navigation
- Pictures {{filteredImages().length}}
- Videos 3
The K-50 Sectional Machine is the perfect all-around sink, shower and floor drain tool. With the capability to run three different size cables: 5⁄16" (8 mm), 3⁄8" (10 mm) and 5⁄8" (16 mm) and a unique, easy-to-use, instant-acting cable clutch, this machine will make short work of clogged drains.
Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet.
- C-8 best for 1 1/4” to 3” (32 mm to 75 mm) drains.
- C-9 best for 2” to 4” (50 mm to 102 mm) drains.
Equipped with an A-17 adapter for runs up to 50’ (15 m) of 5/16” (8 mm) cable or, 35’ (11 m) of 3/8” (10 mm) continuous length cable.
- 5/16” (8 mm) best for ¾” (20 mm) to 1 ½” (40 mm) lines.
- 3/8” (10 mm) best for 1 ¼” (32 mm) to 2” (50 mm) lines.
Show Less
Read More
Product: {{catalogNumber}} {{" - " + skuDescription }}
Product: {{catalogNumber}} {{" - " + skuDescription }}
- Online Stores
- Stores Near You
In Stock
Buy Now
Visit site for availability.
In Stock
Buy Now
Visit site for availability.
Features
- Compact, versatile professional’s machine. Capable of running three different size cables: 5⁄16" (8 mm), 3⁄8" (10 mm) and 5⁄8" (16 mm). The perfect, all-around sink, shower and floor drain machine. Weighs less than 40 lbs (18 kg).
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 400 RPM. Release handle, cable stops instantly.
- Equipped with 1/6 HP motor.
- Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.
- Approved by CSA and UL Standards (115V only).
Support Documents
Operator's Manual
K-50 Sectional Machine Manual (1.09 MB)
Parts List
K-50 Sectional Machine Parts List (115.36 KB)
Parts Catalog
Brochure
Ordering Information
Machine Options
{{model}}
| Catalog Number | Model No. | Description | Voltage(V) | Weight | ||
|---|---|---|---|---|---|---|
| lb. | kg | |||||
| 11971 | K-50 | Machine with A-1 RIDGID drain cleaning mitt | 230 | 37 | 16.8 | Buy Now |
| 11981 | K-50-6 | Machine, with – A-17-A Adapter – A-30 Cable Kit | 230 | 67 | 30.4 | Buy Now |
| 12001 | K-50-8 | Machine, with – A-17-A Adapter – A-17-B Adapter – A-30 Cable Kit | 230 | 67 | 30.4 | Buy Now |
| 11991 | K-50-7 | Machine, with – A-17-B adapter – A-30 cable kit | 230 | 74 | 33.6 | Buy Now |
Cables
{{model}}
| Catalog Number | Model No. | Description | Cable Diameter | Weight | |||
|---|---|---|---|---|---|---|---|
| in. | mm | lb. | kg | ||||
| 62225 | C-1 | 5⁄16" (8 mm) x 25' (7.6 m) with Bulb Auger | - | - | 3 1/2 | 1.6 | Buy Now |
| 56782 | C-1IC | 5/16" (8 mm) x 25' (7.6 m) Inner Core with Bulb Auger | - | - | 4 | 1.8 | Buy Now |
| 62235 | C-2 | 5/16" (8 mm) x 25' (7,6 m) with Drop Head Auger | - | - | 3 1/2 | 1.6 | Buy Now |
| 89400 | C-21 | 5/16" (8 mm) x 50' (15,2 m) with Bulb Auger | - | - | 7 | 3.2 | Buy Now |
| 56787 | C-2IC | 5/16" (8 mm) x 25' (7.6 m) Inner Core with Drop Head Auger | - | - | 4 | 1.8 | Buy Now |
| 89405 | C-22 | 5/16" (8 mm) x 50' (15,2 m) with Drop Head Auger | - | - | 7 | 3.2 | Buy Now |
| 62245 | C-4 | 3/8" (10mm) x 25' (7,6 m) with Male Coupling | - | - | 4 1/2 | 2.0 | Buy Now |
| 62250 | C-5 | 3/8" (10mm) x 35' (10,7 m) with Bulb Auger | - | - | 8 1/4 | 3.8 | Buy Now |
| 62260 | C-6 | 3/8" (10 mm) x 35' (10,7 m) with Male Coupling | - | - | 8 1/4 | 3.8 | Buy Now |
| 96037 | C-6IC | 3/8" (10mm) x 35' (10,7 m) Inner Core with Male Coupling | - | - | 8 1/2 | 4.0 | Buy Now |
| 62265 | C-7 | 5/8" (16 mm) x 7 1/2' (2,3 m) Tight-Wind | - | - | 4 | 1.8 | Buy Now |
| 62270 | C-8 | 5/8" (16 mm) x 7 1/2' (2,3 m) All-Purpose Wind | - | - | 3 | 1.4 | Buy Now |
| 51317 | C-9 | 5/8" (16 mm) x 10' (3,1 m) Heavy- Duty Wind | - | - | 5 | 2.2 | Buy Now |
Cable Kits
{{model}}
| Catalog Number | Model No. | Cable | Tools & Accessories | Weight | ||
|---|---|---|---|---|---|---|
| lb. | kg | |||||
| 59365 | A-30 | Six Sections: C-8, 5⁄8"x71⁄2' (45', 13,7 m) | T-201 Straight Auger T-202 Bulb Auger T-205 “C” Cutter T-211 Spade Cutter A-13 Coupling Pin Key A-10 Cable Carrier A-14-6 Rear Guide Hose A-1 Left-Hand RIDGID Drain Cleaning Mitt | 20 | 9.1 | Buy Now |
| 52962 | A-40 | Six Sections: C-9, 5⁄8" x 10' (60', 18,3 m) | T-206 Funnel Auger T-215 4-Blade Cutter T-231 “C” Cutter A-13 Coupling Pin Key A-10 Cable Carrier A-14-10 Rear Guide Hose A-1 Left-Hand RIDGID Drain Cleaning Mitt | 37 | 16.8 | Buy Now |
| 59370 | A- 30TW | Six Sections: C-7, 5⁄8"x71⁄2" (45', 13,7m) Tight-Wind | Same as A-30 | 30 | 13.6 | Buy Now |
Drum Adapters
{{model}}
| Catalog Number | Model No. | Description | Weight | ||
|---|---|---|---|---|---|
| lb. | kg | ||||
| 59250 | A-17-A | Adapter With 25' (7,6 m) x 5⁄16" (8 mm) Cable w/Bulb Auger | 8 | 3.6 | Buy Now |
| 59255 | A-17-B | Adapter With 35' (10,7 m) x 3⁄8" (10 mm) Cable w/Bulb Auger | 13 | 5.9 | Buy Now |
| 59265 | A-17-C | Adapter With 35' x 3/8" Cable w/Male Coupling | 13 | 5.9 | Buy Now |
| 92095 | A-17-D | Adapter With 50' x 5⁄16" Cable w/Bulb Auger | 12 | 5.4 | Buy Now |
| 92100 | A-17-E | Adapter With 50' x 5⁄16" Cable w/Drop Head | 12 | 5.4 | Buy Now |
Accessories
{{model}}
| Catalog Number | Model No. | Description | Weight | ||
|---|---|---|---|---|---|
| lb. | kg | ||||
| 59235 | A-14-6 | 7' 6" (2, 3 m) Rear Guide Hose | 5 | 2.3 | Buy Now |
| 84325 | A-14-10 | 10' (3 m) Rear Guide Hose | 7 | 3.2 | Buy Now |
| 59210 | A-10 | Cable Carrier Holds 90' (27 m) C-8, C-9 | 3 1/4 | 1.5 | Buy Now |
| 59205 | A-1 | Left-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.2 | Buy Now |
| 59295 | A-2 | Right-Hand RIDGID Drain Cleaning Mitt | 1/2 | 0.2 | Buy Now |
| 59230 | A-13 | 3/8" Cable Pin Key | 1/2 | 0.2 | Buy Now |
| 59450 | A-3179 | Clutch Jaw Assembly | 1 1/2 | 0.7 | Buy Now |
Tools
{{model}}
| Catalog Number | Model No. | Description | Replac. Blade(s) | |
|---|---|---|---|---|
| 62990 | T-201 | Straight Auger, 5" (125 mm) Long | - | Buy Now |
| 62067 | T-201A | Straight Flex Auger | - | Buy Now |
| 62995 | T-202 | Bulb Auger, 1 1⁄8" (29 mm) O.D. | - | Buy Now |
| 63000 | T-203 | Bulb Auger 7⁄8" (22 mm) O.D. | - | Buy Now |
| 54837 | T-204 | “C” Cutter 1" (25 mm) | 54832 | Buy Now |
| 63005 | T-205 | “C” Cutter, 1 3⁄8" (35 mm) | 97835 | Buy Now |
| 63010 | T-206 | Funnel Auger, 3" (80 mm) Long | - | Buy Now |
| 63015 | T-207 | Spiral Cutter, 1 1⁄4" (32 mm) | 97840 | Buy Now |
| 63020 | T-208 | Spiral Cutter, 1 1⁄2" (40 mm) | 97895 | Buy Now |
| 63025 | T-209 | Spiral Cutter, 2" (50 mm) | 97900 | Buy Now |
| 63030 | T-210 | Spade Cutter, 1" (25 mm) | 97905 | Buy Now |
| 63035 | T-211 | Spade Cutter, 1 3⁄8" (35 mm) | 97825 | Buy Now |
| 63040 | T-212 | Spade Cutter, 1 3⁄4" (45 mm) | 92850 | Buy Now |
| 63045 | T-213 | 4-Blade Cutter, 1" (25 mm) | 97795 | Buy Now |
| 63050 | T-214 | 4-Blade Cutter, 1 3⁄8" (35 mm) | 97910 | Buy Now |
| 63055 | T-215 | 4-Blade Cutter, 1 3⁄4" (45 mm) | 97915 | Buy Now |
| 63060 | T-216 | Chain Knocker, 2" (50 mm) | 98000 | Buy Now |
| 63065 | T-217 | Drop Head Auger, 4" (110 mm) Long | - | Buy Now |
| 63280 | T-218 | Flue Brush, 3" (75 mm) | - | Buy Now |
| 63070 | T-219 | Flue Brush, 2 1⁄2" (65 mm) | - | Buy Now |
| 63080 | T-220 | Flue Brush, 2" (50 mm) | - | Buy Now |
| 55457 | T-225 | Retrieving Auger | - | Buy Now |
| 52812 | T-230 | H-D “C” Cutter, 2" (50 mm) | 92815 | Buy Now |
| 52817R | T-231 | H-D “C” Cutter, 2 1⁄2" (65 mm) | 92820 | Buy Now |
| 52822 | T-232 | H-D “C” Cutter, 3" (80 mm) | 92835 | Buy Now |
| 48482 | T-250 | Tool Set includes: T-203, T-205, T-210, T-217, A-13 | Buy Now |
- Reviews
Contact Us Have comments or questions? We'd love to hear from you. Product Registration RIDGID Tools are backed by the best coverage in the industry.
Webinars
Join our webinars and learn how RIDGID products can make your work easier!
